![]() |
| Glen replaced the engine house removed previously. |
The Woodstock Model Railroad Club invites you to come along with as together we build an empire. Stay tuned for progress updates, tips and techniques. All comments are welcome. Email ljbrinker@yahoo.ca
Wednesday, November 29, 2017
Tuesday night at the Huff and Puff 11,28,2017.
A Simplex receiver was installed and tested, worked great. During the week a turnout was installed to separate the team track and piggyback ramp in Springbank. Ralph's cement plant background was installed, Don supplied some Lumber, pipe and crate loads to add to the layout. The defunct Ontario Western leased 14 new pieces of rolling stock. Glen also added scenery around the piggyback ramp. Shelves were added under Valleyview. Cliff tried out his passenger train. Next week is work night.
Wednesday, November 22, 2017
Reality 101
Thanks to a heads up, I realized in my enthusiasm to create the perfect system I forgot to keep in mind our 2 basic rules of K.I.S.S. and KEEP IT FUN. In doing so a F.T.R.S. system was created. When people don't Follow The Rules we degenerate into policing the layout to correct errors, and the fun goes out the window.
First problem, not switching Elsewhere requires almost perfect switching, to keep the consist intact. NOT GOING TO HAPPEN.
Second, switching 1 for 1 car type negates the self correcting system of removing all rolling stock when switching.
Third, mixing of the cards and switching errors. As an example I found both sawdust cars at the sawmill, no covered hoppers at Zorra Cyclone, and main line box car and stock car cards in with the branch line flat car cards, worst of all none of these are even the same colour of Cards?
Fourth, members want to keep the switchers, especially in Lincoln, which complicates the "no switching Elsewhere strategy " and car forwarding.
The fix (as I see it), return to the lowest common denominator!
First, continue to make up trains in Elsewhere.
Second, Return to the self fixing system of removing all cars in a siding,
No fix for mixed cards, but they will get sorted as trains are made up.
The car forwarding and Elsewhere yard design as agreed to, are not effected, but as always are open to better ideas.
Other ideas about districts, switchers at towns being traffic regulators, and others, have been tossed about and look forward to these ideas being developed.
First problem, not switching Elsewhere requires almost perfect switching, to keep the consist intact. NOT GOING TO HAPPEN.
Second, switching 1 for 1 car type negates the self correcting system of removing all rolling stock when switching.
Third, mixing of the cards and switching errors. As an example I found both sawdust cars at the sawmill, no covered hoppers at Zorra Cyclone, and main line box car and stock car cards in with the branch line flat car cards, worst of all none of these are even the same colour of Cards?
Fourth, members want to keep the switchers, especially in Lincoln, which complicates the "no switching Elsewhere strategy " and car forwarding.
The fix (as I see it), return to the lowest common denominator!
First, continue to make up trains in Elsewhere.
Second, Return to the self fixing system of removing all cars in a siding,
No fix for mixed cards, but they will get sorted as trains are made up.
The car forwarding and Elsewhere yard design as agreed to, are not effected, but as always are open to better ideas.
Other ideas about districts, switchers at towns being traffic regulators, and others, have been tossed about and look forward to these ideas being developed.
Monday, November 20, 2017
Wednesday, November 15, 2017
Tuesday night at the Huff and Puff, 11, 14, 2017
With a couple of our members home from holidays the car forwarding and the new cards got a workout in earnest. Even a first time user had no problems with it. The changes to Elsewhere and it's ramifications were also discussed during the operating session. As we now have the required turnouts I think the sooner we can do this the better, from a confusion point of view. I wonder if we could can do it in stages. First cut in the 3 turnouts on track 5. Then cut in turnouts for tracks 4, 3, 2 and the 3 turnouts on track 1, for the ladder to the right hand yard. This would leave 2 stud end tracks in the left hand yard, but all the feeders intact. Then add the last 2 turnouts to connect the 2 stubs. Then extend the length of the left yard and connect the turnouts. Then add the required feeders and ballasting the new track work. Or would it be best to redo it all at once.
![]() |
| Some of the action. |
NMRA
NMRA-WOD Clinic and Layout Tours Nov. 25, 2017.
I believe members of the Woodstock Model Railway Club took out 6 month NMRA
memberships to attend our convention this past May. I would appreciate if you
could forward this invitation to them as well as to your entire membership.
Members of the Woodstock Model Railway who do not have an NMRA membership will
be permitted to participate in this event. If you prefer, I could notify them
for you if you are able to send the membership list to me.
I believe members of the Woodstock Model Railway Club took out 6 month NMRA
memberships to attend our convention this past May. I would appreciate if you
could forward this invitation to them as well as to your entire membership.
Members of the Woodstock Model Railway who do not have an NMRA membership will
be permitted to participate in this event. If you prefer, I could notify them
for you if you are able to send the membership list to me.
Sunday, November 12, 2017
Turnouts arrangement for Elsewhere
The best arrangement I can come up with for the turnouts in the middle section of the new Elsewhere yard. It includes long and medium Peco turnouts. Tried to use the longs where the most traffic would be. This arrangement is under 2 feet long with the needed space between each turnout.
Subscribe to:
Posts (Atom)










